North Carolina Licensed General Contractor with 15+ years in the Wilmington market, and our crews are factory trained through Union Corrugating’s MetalPro program and Air Vent certified—so the details get done right.
Quick response • Clear scope • No pressure
If you’re shopping for metal roofing in Wilmington, NC, you’re probably trying to avoid the same story we see all the time: a roof that looks “fine” from the street, but starts failing at the edges, fasteners, and penetrations after years of heat, storms, and salt exposure. A well-built standing seam metal roof can be one of the best long-term roofing systems for coastal homes—but performance depends on the system details, not just the panel.
At Alpha Roofing, we install metal roofing with a system-first approach. We start with a thorough inspection, confirm the roof deck and ventilation, and help you choose the right metal material for your location—especially near Wrightsville Beach, Carolina Beach, Figure Eight Island, and other higher-exposure areas where corrosion risk is a real value factor with roofing companies in Wilmington NC.
A metal roof isn’t just a different surface—it’s a different roofing system. Done right, it can deliver:
Designed to take on wind-driven rain and harsh sun.
Reflective finishes + proper ventilation can support better comfort (results vary by home).
Fewer common failure points when installed correctly.
If you want a premium standing seam look with a system that’s designed and tested for high performance, SL150 is one of the options we may recommend for the right roof.
Available in .032 aluminum and Galvalume options—so we can match the system to your exposure and design goals.
SL150 is designed to be installed over a solid substrate with underlayment—that’s part of what helps the roof perform as a system, not just as panels.
It also has a minimum slope requirement of 1.5”:12”, so it’s not the right fit for every roof design. If your roof is lower-slope or has tricky transitions, we’ll recommend the best alternative profile.
SL150 can be a great fit if you want:
Best next step: let us take a look and recommend the right system for your roof’s slope, layout, and location.
In the Wilmington market, less than 5% of roofers have been in business 15+ years locally and hold a GC license—and that experience shows up in the details that protect your roof long-term.
Higher standards, tighter oversight, and the experience to manage complex roof details—especially on coastal homes and multi-story installs.
Factory-trained workmanship standards focused on proper installation, clean detailing, and a roof system that performs beyond day one.
Ventilation isn’t an add-on—it’s part of roof performance. We understand how intake/exhaust balance protects the roof deck and helps the system last.
Material selection is where coastal roofs are won or lost. Near the ocean, corrosion risk can turn the wrong metal into an expensive lesson over time. We’ll walk you through what matters most for your home’s exposure—Downtown vs. waterfront vs. open terrain—so you’re not guessing.
.032 aluminum standing seam systems (often preferred when corrosion resistance near salt air is a top priority)
(our most common request)
Galvalume steel systems (a strong option in many situations, depending on exposure, coating, and detailing)
We don’t install one “cookie-cutter” roof. We offer multiple metal profiles and help you choose the right fit for your roof design, exposure, and budget. (That attention to the right system is a big part of our reputation as a roofing company homeowners can rely on.)
Most commonly installed
Most of our metal work in Wilmington and at the beaches is standing seam snap lock—clean lines, strong performance, and a great fit for residential and light commercial properties.
Some projects call for a mechanically seamed system due to roof geometry, slope requirements, or performance goals. If your project needs it, we’ll explain why and outline the best path forward. roof replacement cost
Exposed fastener systems can be a good value for certain buildings and budgets. They’re common on outbuildings and some light commercial projects, but they aren’t always the best choice for high-exposure coastal homes. We’ll be honest about where they make sense—and where they don’t.
On the coast, wind doesn’t just push against your roof—it tries to lift it. Corners and perimeters are typically the highest-pressure zones, which is why attachment and detailing matter so much.
On projects where it’s appropriate, we take a wind-uplift mindset during planning and installation. Sentrigard’s wind calculation request form highlights the kinds of building and zone data used when calculating wind suction pressures and designing attachment patterns. We bring that same “design for reality” thinking to the way we install metal roofing in Wilmington and surrounding beach communities.
Removed the failed galvanized standing seam roof
Removed the failed galvanized standing seam roof
Addressed compromised decking and exterior problem areas so the new system had a solid foundation
Installed with a wind uplift / lift-pressure mindset appropriate for an ocean-exposed environment
“where good roofs separate from bad ones“
Not every metal roof issue requires full replacement. We can help evaluate common metal roof concerns like fastener issues, flashing problems, and isolated leaks. If the system is failing due to widespread corrosion or improper material selection, we’ll explain that too—clearly and honestly—so you don’t waste money on temporary fixes.
(Homeowner-Friendly, No Fluff)
Wilmington, Downtown Wilmington, Wrightsville Beach, Carolina Beach, Figure Eight Island, Landfall, Leland, Hampstead, Ogden, Porters Neck, Monkey Junction, Kure Beach.
If you’re searching for a metal roofing contractor in Wilmington NC or a standing seam installer near the coast, we’re ready to help.
A captivating and benefit-driven headline that effectively communicates your unique value proposition.
factory trained / industry certified workmanship standard
ventilation knowledge that protects roof performance and roof deck health
If you want a metal roof built for coastal conditions—with the right material selection, proper ventilation, and clean detailing—request an estimate and we’ll put together a clear scope you can trust.
While most of our requests are residential, we also handle commercial roofing needs where standing seam systems make sense—especially on properties that prioritize durability, clean aesthetics, and long-term performance.